Siemens SIMATIC ET 200SP Manual page 13

Properties
The module has the following technical properties:
● Digital input module with 16 inputs
● Sink input, (PNP, P-reading)
● Supply voltage L+
● Configurable input delay 0.05 to 20 ms (per channel)
● Configurable diagnostics (per module)
● Suitable for connection of switches and 2-wire sensors in accordance with IEC 61131,
type 3
The module supports the following functions:
Table 2- 1 Version dependencies of the functions
version
Function
Identification data FS01
I&M0 to I&M3
Configuration in RUN FS01
Value status FS01
Accessories
The following accessories must be ordered separately:
● Labeling strips
● Color identification labels
● Reference identification label
● Shield connector
See also
You can find additional information on the accessories in the system manual ET 200SP
distributed I/O system (http://support.automation.siemens.com/WW/view/en/58649293).
Digital input module DI 16x24VDC ST (6ES7131-6BH01-0BA0)
Manual, 09/2017, A5E03573442-AF
HW FW ver-
sion
TIA Portal
V0.0.0 V14 or higher with
and higher HSP 0222
V0.0.0 V14 or higher with
and higher HSP 0222
V0.0.0 V14 or higher with
and higher HSP 0222
STEP 7
V5.x
V5.5 SP3 or higher
with HSP 0229
V7.0
V5.5 SP3 or higher
with HSP 0229
V7.0
V5.5 SP3 or higher
with HSP 0229
V7.0
Product overview
2.1 Properties
GSD file
PROFINET IO PROFIBUS DP
X X
X X
X X
13