Parameters/Address Space; Parameters - Siemens SIMATIC ET 200SP Manual

Parameters/address space

4.1

Parameters

Parameters for DI 16x24VDC ST
Specify the module properties with the various parameters in the course of your STEP 7
configuration. The following table lists the configurable parameters. The effective range of
the configurable parameters depends on the type of configuration.
The following configurations are possible:
● Central operation with an ET 200SP CPU
● Distributed operation on PROFINET IO in an ET 200SP system
● Distributed operation with PROFIBUS DP in an ET 200SP system
When assigning parameters in the user program, use the "WRREC" instruction to transfer
the parameters to the module using the data records; refer to section Parameter assignment
and structure of parameter data record (Page 28).
The following parameter settings are possible:
Table 4- 1 Configurable parameters and their defaults (GSD file)
Parameters
Diagnostics:
No supply voltage L+
Diagnostics
wire break
1
Channel activated
16
Range of values
Disable
•
Enable
•
Disable
•
Enable
•
Disable
•
Enable
•
Default Parameter
reassignment
in RUN
Disable Yes
Disable Yes
Enable Yes
Digital input module DI 16x24VDC ST (6ES7131-6BH01-0BA0)
Scope with configuration software,
e.g. STEP 7 (TIA Portal)
GSD file GSD file
PROFINET IO PROFIBUS DP
Module Module
Module Module
Channel Channel
Manual, 09/2017, A5E03573442-AF
4
2