Connecting a Blu-ray disc player
The following illustration shows how to
connect a Blu-ray disc player.
It is not necessary to connect all the cords.
Connect the audio and video cords according
to the jacks of your components.
Audio signals
A
A Optical digital cord (not supplied)
B Coaxial digital cord (not supplied)
C Audio cord (not supplied)
* When you connect a component equipped with an
OPTICAL jack, set "Input Assign" in the Input
menu.
Blu-ray disc player
Video signals
B
C
Note
To input multi channel digital audio from the Blu-
ray disc player, set the digital audio output setting on
the Blu-ray disc player. Refer to the operating
instructions supplied with the Blu-ray disc player.
D
D Video cord (not supplied)
E Component video cord (not supplied)
Tip
The COMPONENT VIDEO COMPO 1 IN jacks
have been assigned to the Blu-ray disc player. If you
connect your Blu-ray disc player to the
COMPONENT VIDEO COMPO 2 or COMPO 3 IN
jacks, set "Input Assign" in the Input menu.
E
US
27