Sony R-DG1200 Operating Instructions Manual page 91

To operate the TDM-iP1/iP50 or
TDM-NC1 using the adapter
menu
Make sure that "Adapter GUI" is selected in
step 5 in "Selecting an operation screen to
operate the component connected to the
DIGITAL MEDIA PORT adapter" (page 89).
For details on operating the adapter using the
adapter GUI menu, refer to the operating
instructions supplied with the adapter you are
using.
To operate the TDM-iP1/iP50
using the iPod menu
Make sure that "iPod" is selected in step 5 in
"Selecting an operation screen to operate the
component connected to the DIGITAL
MEDIA PORT adapter" (page 89).
For details on operating the iPod, refer to the
operating instruction supplied with the iPod.
Playing back the track selected
During playback of the selected track, the
displayed screen changes depending on the
DIGITAL MEDIA PORT adapter connected.
TDM-iP1
TDM-NC1
You can also operate the components
connected to the DIGITAL MEDIA PORT
adapter using the following play mode buttons
on the remote of the receiver.
Press DMPORT on the remote to enable
DMPORT operation.
To
Play
Pause
Stop
Find the beginning of a
track during playback, or
find the beginning of the
previous track
Find the beginning of the
next track
Skip to the previous
album
Skip to the next album
Go backward/forward
* When a TDM-iP1 is connected, the receiver
enters pause mode when x is pressed.
** Fast-backward/forward while pressing and
holding the m/M button.
Option parameters in the play
modes
x Repeat Mode (TDM-iP1/iP50
only)
Plays one or all the track repeatedly.
• Off
Deactivates the repeat play mode.
• One
Plays one track repeatedly.
• All
Plays all the tracks repeatedly.
Do the following
Press N.
Press X. To resume play,
press the button again.
Press x.*
Press ..
Press >.
Press B• .
Press • b.
Press m/M.**
continued
US
91