Sony R-DG1200 Operating Instructions Manual page 11

Name Function
A AV ?/1 (on/
Press to turn on or off the audio/
standby)
video components that the
remote is assigned to operate
(page 115).
To turn the TV on or off, press
TV (X), then press AV ?/1.
If you press the ?/1 (B) at the
same time, it will turn off the
receiver and other Sony
components (SYSTEM
STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
button (D).
B ?/1 (on/
Press to turn the receiver on or
standby)
set it to standby mode.
To turn off all Sony
components, press ?/1 and
AV ?/1 (A) at the same time
(SYSTEM STANDBY).
To save the power in standby
mode, set "Control for HDMI"
to "OFF" (page 54).
C AMP
Press to light up the button to
enable receiver operation
(page 36).
D Input
Press one of the buttons to
buttons select the component you want
b)
(TV ) to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components (page 47). You can
program the remote to control
non-Sony components
following the steps in
"Programming the remote"
(page 115).
Numeric Press SHIFT (W), then press
buttons the numeric buttons to
b)
(number 5 )
– preset/tune to preset stations.
– select the track numbers of
the DVD player, MD deck,
etc. Press 0/10 to select track
number 10.
– select the channel numbers
of the VCR, satellite tuner,
etc.
Press TV(X), then press the
numeric buttons to select the
TV channels.
Name Function
-/-- Press SHIFT (W), then
press -/-- to select the channel
entry mode, either one or two
digit of the VCR, satellite tuner,
etc.
Press TV (X), then press -/-- to
select the channel entry mode of
the TV.
ENT/MEM Press SHIFT (W), then press
ENT/MEM to
– enter the value after selecting
a channel, disc or track using
the numeric buttons.
– store a station during tuner
operation.
Press TV (X), then press ENT/
MEM to enter the value of Sony
TV.
TV INPUT Press TV (X), then press TV
INPUT to select the input signal
(TV input or video input).
WIDE
Press TV (X), then press
WIDE repeatedly to select the
wide picture mode.
D.TUNING Press SHIFT (W), then press
D.TUNING to enter direct
tuning mode (page 110, 112).
CLEAR Press SHIFT (W), then
press CLEAR to
– clear a mistake when you
press the incorrect numeric
button.
– return to continuous
playback, etc. of the satellite
tuner, DVD player, etc.
E 2CH/
Press to select a sound field
A.DIRECT
(page 57) or to switch the audio
of the selected input to analog
signal without any adjustment
(page 110).
A.F.D. Press to select a sound field
(page 59).
MOVIE
MUSIC
F SLEEP
Press to activate the sleep timer
function and the duration which
the receiver turns off
automatically (page 100).
G NIGHT
Press to activate the NIGHT
MODE MODE function (page 63).
continued
US
11