Page 1
INW-UNIFM Installation Guide INWALL BOX FOR UNIVERSIAL FLAT MOUNT www.mounts.com | North America 800.368.9700 | International +1-714-632-7100 2620 Palisades Drive, Corona, CA 92882...
Page 2
INW-UNIFM Installation Guide Included Components: (4) M4 x 12 mm Snap in Snap In Socket Universal Power 8/32- 3/8” (4) M6 x 12 mm Plug Plate Ground Screw Socket (4) M8 X 12 mm Comb. Screw In-wall Mount M4 x 6mm...
Page 3
INW-UNIFM Installation Guide (2) #10 x 2” Wood screw Drill the wood screws to the stud. A. Media Player / Set top Box B. Display 110V Load Wire Neutral Wire Ground M4 x 8mm Screw 220V 1. Put the wires up through the electrical box.
Page 4
INW-UNIFM Installation Guide 8-32 Grounding Screw Lightly install four (4) M4 x 6mm screws inside the Connect the ground to the outlet box with the in-wall box. provided ground screw. Secure the media player to either racks 1. Insert the key slot holes onto the screws inside using the supplied zip ties.
Page 5
INW-UNIFM Installation Guide M6 X 10mm Comb.Screw 5/16 Washers Install the (2) Cross Bars using 5/16” X 3” (4) 5/16 X 13 Hex Lag, Washers, Hex Lag and M6 x 10mm Screw. Universal Washer Install the Mounting Bracket with the supplied (4) Universal Washer and (4) Mounting Screws.
Page 6
INW-UNIFM Installation Guide Insert a small straw or toothpick into the threaded inserts found on the back of the flat-panel. Use a pencil to mark the depth of the threaded insert on the small straw or toothpick. Mark the straw or toothpick 1/8” above the depth of the threaded insert, as shown in Figure 1.
Page 7
INW-UNIFM Installation Guide Universal Spacer Installation Mounting Screw Premier Mounts’ Universal Spacers allow you to attach the mounting bracket to flat-panels which have recessed or uneven mount points. Universal Washer Each Universal Spacer adds 1/4” to the distance between the Mounting Bracket mounting bracket and your flat-panel.
Page 8
INW-UNIFM Installation Guide INW-UNIFM Mount includes one (1) Security Barrel which can provide additional theft deterrence for your flat panel. Security Cable - Thread the cable through the hole on the security barrel. Attach the PCB-CSL1 locking mechansim and secure it using the supplied key.
Page 10
Premier Mounts intends to make this manual accurate and complete. However, Premier Mounts makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Need help?
Do you have a question about the INW-UNIFM and is the answer not in the manual?
Questions and answers