Making a call
♦
Use your smartphone to dial the required telephone number .
The call is automatically transferred to the headphones .
♦
Speak into the microphone
your call .
Accepting/ending/rejecting a call
NOTE
►
If you are listening to music and receive a call, you will hear
the ringtone in the headphones and playback is stopped . After
finishing the call, playback will be resumed automatically .
►
You can accept/reject calls via the headphones or your
smartphone . The sound is automatically played back through
the headphones .
Press 1 x briefly (for incoming call)
Press 1x briefly (during call)
Press and hold for approx . 2 seconds (for
incoming calls)
Music playback via AUX IN
You can use the supplied audio cable
to non-Bluetooth
the headphones behave like normal, cable-connected headphones
and can even be used with an empty battery . The Bluetooth
function is deactivated and the buttons on the
headphones do not function .
♦
Make sure that the headphones are switched off .
♦
Connect the audio cable
headphones .
♦
Connect the audio cable
phone jack) on the playback device .
♦
Switch on the playback device and set the volume to minimum .
♦
Put on the headphones as described in the section Wearing
the headphones .
♦
Set the desired volume on the playback device .
SKHK 40 A1
Button
-compatible playback devices . In AUX IN mode,
®
on the headphones to make
q
6
to connect the headphones
e
to the AUX IN socket
e
to the audio output (e .g . head-
e
GB │ IE │ NI
Function
Accept call
End call
Reject call
®
of the
8
│
13
■