Oven Assembly; Nsf Bolts - Blodgett MARK V-100 Installation Operation & Maintenance
Hide thumbs
Also See for MARK V-100:
- Installation operation & maintenance (49 pages) ,
- Installation manual (18 pages) ,
- Installation and operation manual (72 pages)
Table of Contents
Advertisement
Installation
Oven Assembly
NSF BOLTS
These bolts are required by NSF to block any exposed
hole on the back of an oven. This includes:
•
any unit, single or stacked, without a back panel.
•
any holes in stacked units not used for mounting
stacking brackets.
Double Stacked Units
1. Locate the 5/16" bolts that were shipped with the
oven.
2. Install the bolts as shown.
Units without back panels
Figure 2
4
Advertisement
Table of Contents
