Table of Contents
Advertisement
3 Setting the Positioning System over the
LAN
Notes:
You shall acknowledge that the use of the product with Internet access might be
under network security risks. For avoidance of any network attacks and information
leakage, strengthen your own protection. If the product does not work properly,
contact with your dealer or the nearest service center.
To ensure the network security of the network positioning system, we recommend
you to have the positioning system assessed and maintained termly. You can contact
us if you need such service.
3.1 Wiring
To view and configure the network positioning system via LAN (Local Area Network), you
need to connect the positioning system in the same subnet with your PC. Then, install
the SADP or client software to search and change the IP address of network positioning
system.
Connect the network positioning system to network according to Figure 3-1 and Figure
3-2.
Network Positioning System
3.2 Activating the Positioning System
Purpose:
You are required to activate the positioning system first by setting a strong password for
it before you can use the positioning system.
Network Positioning System·Quick Start Guide
Figure 3-1 Connecting Directly
Figure 3-2 Connecting via a Switch or a Router
22
or
Computer
Advertisement
Table of Contents
