HIKVISION DY5 Series Quick Start Manual page 21

3. Connect the cables of IR modules.
1) Loosen the toggles from the bolts on the downside of the housing and pull the
bolts outward from the housing.
2) Open the lid.
3) Connect the cables to the connectors on the housing respectively.
4. Insert the memory card into the memory card slot as shown in Figure 2-18 and
Figure 2-19.
Network Positioning System·Quick Start Guide
Figure 2-16 Open the Housing
Figure 2-17 Connect the Cables
Figure 2-18 Install the Memory Card
20