HIKVISION DY5 Series Quick Start Manual page 18

Notes:
 Panning Adjustment: Loosen the two panning fastening screws, rotate the
eccentric wheel to adjust the laser spot in the horizontal direction, and fasten the
screws after adjusting.
 Tilt Adjustment: Tighten or loosen the tilting adjustment screw to adjust the
position of the laser spot in the vertical direction.
3. Restore the housing and tighten the screws for waterproof.
Network Positioning System·Quick Start Guide
Figure 2-9 Adjust the Laser (Type IV)
Figure 2-10 Restore the Housing (Type III)
17
Eccentric Wheel
Tilting Adjustment
Screw
Panning
Fastening Screw