M Scotch Tape Mount Installation - Gazer F121 User Manual

Mobile video recorder
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
Tape mount installation
Warning!
Wipe the surface of the windshield before in-
Warning!
stalling. Make sure the place of installation is dry and
Wipe the surface of the windshield before installing.
Make sure the place of installation is dry and clean. Do not install
clean. Do not install the mount on 3M scotch tape at
Warning!
Wipe the surface of the windshield before installing.
the mount on 3M scotch tape at temperatures below +5°C. Due
temperatures below +5°C. Due to such low temperature
Make sure the place of installation is dry and clean. Do not install
to such low temperature and the difference between the
and the difference between the temperature inside the
the mount on 3M scotch tape at temperatures below +5°C. Due
temperature inside the car and outdoors, the 3M scotch will lose
Warning!
Wipe the surface of the windshield before installing.
car and outdoors, the 3M scotch will lose its adhesive
to such low temperature and the difference between the
its adhesive properties and will not be able to fix the mount
Make sure the place of installation is dry and clean. Do not install
properties and will not be able to fix the mount properly.
temperature inside the car and outdoors, the 3M scotch will lose
properly.
the mount on 3M scotch tape at temperatures below +5°C. Due
its adhesive properties and will not be able to fix the mount
to such low temperature and the difference between the
properly.
temperature inside the car and outdoors, the 3M scotch will lose
1
its adhesive properties and will not be able to fix the mount
properly.
1
1
Attach the MVR frame to the 3M scotch
Attach the MVR frame to
mount.
Attach the MVR frame to the 3M scotch
the 3M scotch mount.
mount.
3
Attach the MVR frame to the 3M scotch
3
mount.
3
Fix the mobile video recorder on 3M
Fix the mobile video recorder on 3M
Fix the mobile video re-
scotch tape to the selected place on
scotch tape to the selected place on
the windshield.
corder on 3M scotch tape
the windshield.
Fix the mobile video recorder on 3M
to the selected place on
scotch tape to the selected place on
the windshield.
the windshield.
5
5
5
2
2
2
To remove the MVR from the mount,
To remove the MVR from the mount,
first press tab 1. Then, holding the tab,
first press tab 1. Then, holding the tab,
remove the recorder from the mount by
remove the recorder from the mount by
To remove the MVR from the mount,
sliding it to the side 2.
To remove the MVR from
sliding it to the side 2.
first press tab 1. Then, holding the tab,
the mount, first press tab 1.
remove the recorder from the mount by
Then, holding the tab, remove
sliding it to the side 2.
the recorder from the mount
by sliding it to the side 2.
tape mount installation
tape mount installation
tape mount installation
Remove the protecting film from the
Remove the protecting film
mount.
Remove the protecting film from the
from the mount.
mount.
Remove the protecting film from the
mount.
Loosen screw 1 by turning it
Loosen screw 1 by turning it
Loosen screw 1 by turning it
counterclockwise. Regulate the MVR
counterclockwise. Regulate the MVR
position on the mount and set the
counterclockwise. Regulate
position on the mount and set the
recording angle. Tighten screw 1 by
the MVR position on the
recording angle. Tighten screw 1 by
Loosen screw 1 by turning it
turning it clockwise.
counterclockwise. Regulate the MVR
turning it clockwise.
mount and set the recording
position on the mount and set the
angle. Tighten screw 1 by
recording angle. Tighten screw 1 by
turning it clockwise.
turning it clockwise.
1
1
1
To remove the mount from 3M tape,
To remove the mount from 3M tape,
take a ruler or credit card, and push it
take a ruler or credit card, and push it
gently between the mount and the
gently between the mount and the
To remove the mount from 3M tape,
windshield.
To remove the mount from
windshield.
take a ruler or credit card, and push it
3M tape, take a ruler or
gently between the mount and the
credit card, and push it gen-
windshield.
tly between the mount and
the windshield.
2
2
2
4
4
1
4
1
1
6
6
6
ENG
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

F121g

Table of Contents