Preparing Mvr - Gazer F121 User Manual

One must adjust the MVR settings before using the
device. The main settings are optimal by default
(factory settings) but in any case, you must set the
exact time and date. This is necessary for correct
functioning in the recording mode and further analy-
sis of recorded video sequences.
1. Do not connect the MVR to the power supply yet.
First make sure that all the indicators are off and
insert the memory card.
serted with connectors towards the display.
2.
Connect the recorder's power unit to the car's ciga-
rette lighter socket and supply the power.
turn on the MVR, it automatically switches to the
recording mode. That is why you will see the real
time camera image at once (loop-through channel)
and the recording mode indicator will light up.
3. Press the «REC/OK» button to stop the record-
ing first, if you want to go to the settings menu
(the recording mode will take some time to shut
down as it is closing and saving the current file)
and then click the «MODE/RETURN» button.
4. Use «UP» and «DOWN» buttons to navigate
through the menu, «REC/OK» to go to the
submenu and select the setting, and «MODE/
RETURN» button to go back.
Warning! In the settings menu, options «GPS
POWER», «STAMP SPEED» and «EDOG BEEP» are
available when you connect an optional GPS module.

Preparing MVR

The memory card is in-
ENG
When you
11