Honeywell Miller AirCore Oil & Gas Harness User Instruction Manual Supplement page 7

Us er I n struc tio n Man ua l Supp leme n t - E ngl i sh
Attaching Seat Sling
Lay harness on a flat surface with the back side facing
up. Place the seat sling on the harness just below the
belt and back pad with the webbing straps facing up
and the mating buckle connectors extending toward the
belt and back pad. Connect the mating buckle compo-
nent on the seat sling with the corresponding mating
buckle component on the harness waist strap as shown.
Repeat for the opposite
side. Ensure that
webbing straps are not
twisted and that buckles
are securely and prop-
erly connected.
Attaching Bosun Chair
Lay harness on a flat surface with the back side facing
up. Place the bosun chair on the harness just below
the belt and back pad with the webbing straps facing
up and the mating buckle connectors extending toward
the belt and back pad. Connect the mating buckle
component on the bosun chair with the corresponding
mating buckle compo-
nent on the harness
waist strap as shown.
Repeat for the oppo-
site side. Ensure that
webbing straps are not
twisted and that buckles
are securely and prop-
erly connected.
7