Related Manuals for TLV BE8H Series
Summary of Contents for TLV BE8H Series
- Page 1 TEG-BE8H-M-00 20 August 2013 Bellows Sealed Valve BE8H Copyright © 2013 by TLV Euro Engineering GmbH All rights reserved...
-
Page 2: Table Of Contents
Contents Introduction ................ 1 Safety Considerations ............2 Installation & Operational Considerations ......3 Product Description............ Requirements for Maintenance Staff ......Transport and Storage ..........Function ..............Application ..............Configuration.............. Installation ..............Maintenance .............. Service and Repair ............ 10. Troubleshooting ............11. -
Page 3: Safety Considerations
• The cautionary items below are very important for safety: be sure to observe all of them as they relate to installation, use, maintenance, and repair. Furthermore, TLV accepts no responsibility for any accidents or damage occurring as a result of failure to observe these precautions. -
Page 4: Installation & Operational Considerations
Turning past these points may cause product malfunction or damage. 1. Product Description BE8H series bellows sealed globe valves are used as stop valves. Stop valves are designed only for shutting off and opening the path of flow. Stem sealing is performed by a flexible bellows and an additional protecting gland. -
Page 5: Function
4. Function BE8H series valves are designed to shut off the medium flow. The type of working medium may make some materials unsuitable for use. Valves are designed for normal working conditions. Working pressure is related to the maximum temperature of the medium as shown in the table below. -
Page 6: Maintenance
The pipeline where the valve is fitted should be arranged in such a way that the valve body is not subjected to any bending or stretching forces. Bolted joints on the pipeline must not cause additional stress resulting from excessive tightening, and fastener materials must comply with the working conditions of the plant, ・... -
Page 7: Service And Repair
9. Service and Repair For safety assurance, each valve should be surveyed and maintenance carried out regularly especially for those which are used rarely. The frequency of these activities should be determined by the user on the basis of working (operating) conditions, nevertheless they should be done at least once a month. -
Page 8: Disposal
4) Malfunctions due to disasters or forces of nature. 5) Accidents or malfunctions due to any other cause beyond the control of TLV Euro Engineering GmbH. 4. Under no circumstances will TLV Euro Engineering GmbH be liable for consequential economic loss damage or consequential damage to property.
Need help?
Do you have a question about the BE8H Series and is the answer not in the manual?
Questions and answers