Specifications - Sony WAHT-SA1 Operating Instructions Manual

• Move away the other components from the
surround amplifier or turn off the other
components.
Operation
The system does not work normally.
• Disconnect the AC power cord (mains lead)
from the wall outlet (mains), then reconnect
after several minutes.

Specifications

TA-SA100WR
(Surround amplifier)
AUDIO POWER SPECIFICATIONS
for the US model
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
Amplifier section
US models:
Surround mode (reference) RMS output power
Other models:
Stereo mode (rated)
Surround mode (reference) RMS output power
* Depending on the source, there may be no
sound output.
Rated impedance:
General
Power requirements:
North American models: 120 V AC, 60 Hz
Mexican models:
Taiwan models:
With 3 ohm loads,
both channels
driven, from 120 -
20,000 Hz; rated 50
watts per channel
minimum RMS
power, with no
more than 0.7 %
total harmonic
distortion from 250
milliwatts to rated
output.
: 143W (per
channel at 3 ohms,
1 kHz, 10 % THD)
80 W + 80 W (at
3 ohms, 1 kHz, 1 %
THD)
: 143 W (per
channel at 3 ohms,
1 kHz, 10 % THD)
3 - 16 Ω
120 V AC, 60 Hz
120 V AC,
50/60 Hz
13
US