SONY SRS-TP1 - Stereo Speaker System Manual

SONY SRS-TP1 - Stereo Speaker System Manual

Also See for SRS-TP1:

Advertisement

SONY SRS-TP1 - Stereo Speaker System Manual

WARNING

Before operating the unit, please read this manual thoroughly and retain it for future reference.

shock hazardTo reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not place objects filled with liquids, such as vases, on the apparatus.
Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

The validity of the CE marking is restricted to only those countries where it is legally enforced, mainly in the countries EEA (European Economic Area).

Precautions

On placement

  • Do not set the speaker in an inclined position.
  • Do not leave the system in a location near heat sources, or in a place subject to direct sunlight, excessive dust, moisture, rain or mechanical shock.

On operation

  • Do not open the cabinet. Refer servicing to qualified personnel only.
  • Should any solid object or liquid fall into the system, have the system checked by qualified personnel before operating it any further.
  • Although this system is magnetically shielded, do not leave recorded tapes, watches, personal credit cards, or floppy disks with magnetic coding in front of the system for an extended period of time.

On cleaning
Do not use alcohol, benzine, or thinner to clean the cabinet.
If you have any questions or problems concerning your speaker system, please consult your nearest Sony dealer.

If the TV picture or monitor display is magnetically distorted
Although this system is magnetically shielded, there may be cases that the picture on some TV sets/personal computer sets may become magnetically distorted. In such a case, turn off the power of the TV set/personal computer set once, and after 15 to 30 minutes turn it on again. For the personal computer set, take the appropriate measures such as data storage before turning it off.
When there seems to be no improvement, locate the system further away from the TV set/personal computer set. Furthermore, be sure not to place objects in which magnets are attached or used near the TV set/personal computer set, such as audio racks, TV stands, toys etc. These may cause magnetic distortion to the picture due to their interaction with the system.

How to use

(See fig. )
How to use

  1. Push the plug down to free the cord. (See fig. )
  2. Open the case completely. (See fig. )
  3. Pull back the top of the case to face the speaker forwards. (See fig.)
  4. Set the speaker in its speaker stand. (See fig. )

Winding up the cord (See fig. )
Winding up the cord

  1. Wrap the cord in the groove around the case. (See fig. )
  2. Insert the projection of the plug into its retaining slot in the case. (See fig. )

Hooking up the unit

(See fig. )
Hooking up the unit

Connect the unit to the source device.
When the system is connected to the monaural jack of the source device, sound may not come through the right speaker. In such a case, use the optional* plug adaptor PC-236MS.

To connect to a stereo phone-type headphones jack
Use the optional connecting cord RK-G138 or plug adaptor PC-234S.*

* The above optional accessories are not provided in some areas.

Listening to the sound

Before connecting the speaker to the headphone output, reduce the volume of the source device.

  1. Start playing on the source device.
  2. Adjust the volume.

Notes

  • Adjust the volume of the connected source device.
  • If the source device has a bass boost function or equalizer function, set them to off. If these functions are on, sound may be distorted.

Troubleshooting

Should you have a problem with your speaker system, check the following list and take the suggested measures. If the problem persists, consult your nearest Sony dealer.

No sound

  • Check that the source device is turned on.
  • Turn up the volume of the source device as high as possible to the extent that sound is not distorted. For details on volume adjustment, refer to the operating instructions supplied with the device.
  • Make sure all the connections have been correctly made.

Low sound level

  • Turn up the volume of the source device as high as possible to the extent that sound is not distorted. For details on volume adjustment, refer to the operating instructions supplied with the device.

Distorted sound

  • Turn down the volume of the source device to the point where the sound is no longer distorted. For details on volume adjustment, refer to the operating instructions supplied with the device.
  • If the source device has a bass boosts function, set it to off.

There is hum or noise in the speaker output

  • Make sure all the connections have been correctly made.
  • Make sure none of the audio devices are positioned too close to a TV set.

If the speaker stand and the case become detached due to impact.
To re-attach the speaker stand and the case, insert the pins in the hinges of the case (see fig. ).
o re-attach the speaker stand and the case

Specifications

Speaker section

Speaker system Full range, Open back, Magnetically shielded 50 mm
Impedance 8 Ω
Rated input power 0.1 W + 0.1 W
Maximum input power 0.15 W + 0.15 W

General

Input Connecting cord with stereo-mini plug (30 cm) × 1
Dimensions (w/h/d) Folded: Approx, 132 × 21 × 72 mm
(5 1/4 × 27/32 × 2 7/8 in.)
Opened: Approx, 132 × 67 × 80 mm
(5 1/4 × 2 3/4 × 3 1/4 in.)
Mass Approx, 200 g (7 oz.)

Supplied accessory
Operating Instructions (1)

Optional accessories
Plug adaptor PC-234S, PC-236MS
Connecting cord RK-G138

The above optional accessories are not provided in some areas.
Design and specifications are subject to change without notice.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download SONY SRS-TP1 - Stereo Speaker System Manual

Advertisement

Need Assistance?

Do you have a question about the SRS-TP1 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents