•
To avoid damage caused by improper operation, do not open
the chassis even if the switch is powered off.
NOTE:
The switch is a class-A device and might cause electromagnetic
interference (EMI). Take actions to prevent EMI when
necessary.
Installing the switch
Table 1 Mounting options available for the switch
Switch
model
S8G-U
S9-PWR
S16G-U
S24-U
S24G-U
Mounting in a 19-inch rack
No mounting brackets and screws are provided with the switch.
Prepare them yourself.
To install the switch in a 19-inch rack:
Verify that the rack is reliably grounded and is stable.
1.
Use screws to attach the mounting brackets to both sides of the
2.
chassis.
Rack mounting
Not supported
Not supported
Supported
Supported
Supported
Workbench
mounting
Supported
Supported
Supported
Supported
Supported
2
Wall
mounting
Supported
Supported
Not supported
Not supported
Not supported