Mounting On A Workbench; Mounting On A Wall - H3C Mini Series Manual

NOTE:
Mounting brackets are used only for securing the switch to the
rack. A rack shelf on the rack is required to bear the switch
weight.

Mounting on a workbench

Verify that the workbench is clean, sturdy, and reliably
1.
grounded.
Place the switch bottom up, and clean the four recessed areas
2.
in the chassis bottom with a soft and dry cloth.
Attach the rubber feet to the recessed areas.
3.
Place the switch upside up on the workbench.
4.

Mounting on a wall

You can use pan-head screws and the mounting holes in the switch
bottom to mount the switch on a wall.
No screws and screw anchors are provided with the switch. Prepare
them yourself. The following figure shows the screw and screw
anchor of the recommended size.
4