Fan Control For Energy Saving (For Administrator); Summer Time (Daylight Saving Time) Setting (For Administrator); Preference (For Administrator) - Fujitsu UTY-RNRUZ2 Operating Manual

(7)
Auto Off
Fri 10:00AM
Enable/Disable [Disable]
Absence Detection Time [In 24 hr]
Cancel OK
When the [OK] is touched, the display returns to "Auto
Off" screen.
(9) Touch the [Absence Detection Time] on the "Auto Off"
screen.
(10) The "Absence Detection Time" screen is displayed. Set
the time with [ ] or [ ]. The time can be set from 1 to
24 hr.
(9)
Auto Off
Fri 10:00AM
Enable/Disable [Disable]
Absence Detection Time [In 24 hr]
Cancel OK
Note
When detection time the same as or shorter than "Auto
Saving" is set at "Auto Off", "Auto Saving" does not oper-
ate.
When the [OK] is touched, the display returns to the "Auto
Off" screen. And when the [OK] on the "Auto Off" screen
is touched, the display returns to the "Human Sensor
Setting" screen.
When the [Back] on the "Human Sensor Setting" is
touched, the display returns to the "Special Setting"
screen.
3-5-7 Fan Control for Energy Saving
(for administrator)
(1) Touch the [Fan Control for Energy Saving] on the "Spe-
cial Setting" screen. When the "Password Verification"
screen is displayed, enter the password and touch the
[OK].
(2) "Fan Control for Energy Saving" screen is displayed.
Touch the [Enable] on the "Fan Control for Energy Sav-
ing" screen.
(1)
Special Setting
Page 2/ 2
Human Sensor
Away Setting
Setting
Fan Control for
Energy Saving
Previous
Back
Page
When the [OK] is touched, the display returns to the
"Special Setting" screen.
(8)
Enable/Disable
Enable
Disable
Cancel OK
(10)
Absence Detection Time
Fri 10:00AM
In
24
hr
Cancel OK
(2)
Fan Control for Energy Saving
Enable
Disable
Cancel OK
3-6 Summer Time (Daylight Saving Time)
Setting (for administrator)
The time display and timer operation are 1 hour earlier than
usual.
(1) Touch the [Summer Time
Setting] on the "Main Menu"
screen.
Enable or Disable the Summer Time Setting
(1) "Summer Time Setting" screen
is displayed. Select the [En-
able] or [Disable] on the "Sum-
mer Time Setting" screen.
When the [OK] is touched, after the setting change
screen is displayed, the display returns to the "Main
Menu" screen.

3-7 Preference (for administrator)

Settings of the Touch Panel Display
(1) Touch the [Preference] on the "Main Menu" screen.
(2) "Preference" screen is displayed.
(1)
Main Menu
Page 2/ 2
Summer Time
Preference
Setting
Initial Setting Maintenance
Previous
Monitor
Page
The following contents are set:
• Panel Calibration:
When the touched position and the corresponding
position does not match on the screen, perform this
setting.
• Backlight Setting:
Backlight enable/disable, brightness, and off time can
be set.
• Contrast:
Adjusts the contrast of the screen.
When the item to be set is touched, the display switches
to each setting screen. When each setting is complete
or canceled, the display returns to this screen. When
[Back] is touched, the display returns to the "Main Menu"
screen.
Main Menu
Page 2/ 2
Summer Time
Preference
Setting
Initial Setting Maintenance
Previous
Monitor
Page
Summer Time Setting
Enable
Disable
Cancel OK
(2)
Preference
Panel Backlight
Calibration Setting
Contrast
Back
En-16