Page 2
Reference Guide section in the back of this manual. The exploded views show all the parts of a particular assembly step along with the Serpent part number. The parts lists indicate the part number andname of each part for easy reference when ordering.
HOW TO USE THE MANUAL LINES DESCRIPTION ICONS DESCRIPTION Each step contains a variety of numbers, lines, and symbols. The numbers represent the order in Each step contains a variety of symbols described below. which the parts should be assembled. The lines are described below. Step number;...
Page 4
FRONT ASSEMBLY STEP BAG 1 Nylock Nut M3 M3x6 M3x6 M3x8 M3x6 M3x8 Nylock Nut M3...
CENTRAL ASSEMBLY STEP 12 STEP 13 BAG 3 13.1 13.2 M3x6 1.5 mm M3x6 M3x14 11.5 mm M3x6 M3x14...
Page 12
STEP 14 M3x5 M3x6 M3x10 left right M3x10 M3x5 M3x6...
Page 13
STEP 15 STEP 16 16.1 To exchange the sidesprings it is needed to remove before the bearing holder. 16.2 3x6x2.5 M3x5 M3x6 16.3 M3x5 M3x6 M3x6 M3x5 M3x6 3x6x2.5 M3x5 M3x6...
Page 14
STEP 17 STEP 18 BAG 4 Pivotball LONG M3x5 M3x5 3x5x2 Pivotball SHORT M3x6 M3x6 3x5x2 M3x5...
Page 21
STEP 29 BAG 7 29.1 Apply the silicone oil on the inner tube. Use the silicone oil supplied in the kit. For the correct 29.2 cst value please check the default setupsheet. M3x8 3x5x1 M3x8 3x5x1...
SHOCK ASSEMBLY STEP 30 STEP 31 31.1 31.2 32.1 Use some silicone oil Use some silicone oil during the assembly. during the assembly. Use some silicone oil Oil the foam fully before during the assembly. Completely tighten the nut assembled in step 30.2.
Page 23
STEP STEP 32 STEP 33 STEP 34 Close the shock slowly. 33.1 35.1 Important: do not crossthread! built-in bleed channel. 3x5x1 Tighten carefully until the bottom half sits against the shock body. 35.2 33.2 1) Fill the shock body with shock absorber oil.
FINAL ASSEMBLY STEP 35 STEP 36 BAG 8 Use narrow fans that don’t touch the pod plate or the battery holder. Use double sided tape to mount the FANS to the chassis. M3x6 M3x6 M3x6...
Page 25
STEP 37 LOW TRACTION CONFIGURATION DEFAULT HIGH TRACTION CONFIGURATION OPTIONAL recommended for low traction Recommended for general use. use (dusty asphalt, wet racing). Nylock Nut M3x6 M3x12 M3x12 M3x6 BATTERY MOUNT POSITION To assemble the battery it is needed to remove the M3x6 screw and turn the battery holder . M3x20 M3x6 Nylock Nut M3...
Page 31
STEP 44 110116 411207 411020 401755 411141 411140 411044 411097 411041 411203 411415 401758 411367 411405 411368 opt 411162 411216 opt 110409 411162 411449 411207 411366 Center spring 6.5lbs 411214 Center spring 12lbs S120L 411368 Center spring 10lbs 411215 Center spring 14lbs S120L 411216 Center spring 16lbs S120L 411217 Center spring 18lbs S120L...
TEAM SERPENT NETWORK 120 PRO SPARE PARTS www.serpent.com/410067/spares/ 120 PRO OPTIONALS PARTS www.serpent.com/410067/Optionals/ SERPENT TOOLS www.serpent.com/product/Tools/ SERPENT MERCHANDISING www.serpent.com/product/Merchandising/...
Page 37
SERPENT WEBSITE AND BLOG www.serpent.com www.teamserpent.com www.dragon-rc.com SERPENT PROMO PAGES http://promo.serpent.com SERPENT FACEBOOK GROUPS http://promo.serpent.com/indexfb.htm SERPENT ADVANCED MANUALS http://promo.serpent.com/sam/ SERPENT SOCIAL MEDIA www.facebook.com/SerpentMRC www.youtube.com/user/SerpentMRC www.twitter.com/SerpentMRC www.plus.google.com/+SerpentModelcars/posts www.weibo.com/teamserpent...
Page 38
INSTRUCTION MANUAL Manual S120 PRO #80900-1...
Need help?
Do you have a question about the S120 PRO and is the answer not in the manual?
Questions and answers