Adjust To Lens; Connection; Connecting To A Monitor - Samsung SIR-4150 Series User Manual

Adjust to Lens

Adjust to the lens's zoom and focus.
1. Please loosen a front cover fixing screw with picture and separate cover
2. Please unlock the Zoom or Focus lever to release it.
3. Adjust the zoom or focus lever by moving it to WIDE(NEAR)or TELE(FAR)
position.
4. After adjustment, tighten the zoom or focus lever, taking care that the
adjusted position does not change.
5. Please close cover and tighten the front cover fixing screw.
Front cover fixing screw
Note
• If front cover fixing screw do not pinch, it is not waterproof.
14
COLOR IR CAMERA
Focus lever
ZOOM lever
User's Manual
Connecting to Monitor
Please connect the video output terminal located on the back of the camera to
the monitor.
CCD Camera
• The connection method varies depending on the type of monitor and accessories.
Please refer to the user's manual for each instrument.
• Please turn off the power when connecting.
• Please select Hi-Z on the 75Ω/Hi-Z switch for the intermediate video TV set
and select 75Ω for the Intermediate device as shown in the picture below.
CCD Camera
COLOR IR CAMERA

Connection

Monitor
Intermediate End monitor
15
User's Manual