Page 1
TEL : +44-1932-45-5308 FAX : +44-1932-45-5325 www.samsungtechwin.com www.samsungcctv.com High Resolution Day & Night IR Camera SIR-4150 Thank you for purchasing a SAMSUNG CCD CAMERA. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
Page 2
• NTSC MODELS • PAL MODELS SIR-4150N SIR-4150P ■ MODEL DESCRIPTION • SIR-4150 X _ SIGNAL SYSTEM • SIGNAL SYSTEM N --> NTSC MODEL P --> PAL MODEL The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”...
Contents Features Warnings & cautions Components and Accessories Overview ■ Front ■ Bottom ■ Back Adjust to lens ■ Ajust to Lens’s ZOOM and Focus Connection ■ Connecting to a monitor ■ Connecting to power ■ RS-485 Communication control COLOR IR CAMERA User’s Manual Operating Your Camera ■...
Notes • SIR-4150 does not need special Housing because it is Housing built-in type. Please remove front glass certainly in case of installation on outdoors style Housing inside.
Page 5
Precautions Do not install under extreme Do not install in high humidity temperature conditions. environment. Use only under temperature conditions May lower image quality. between -10˚C and +50˚C. Provide good ventilation when using in high temperature conditions. Do not install under unstable Avoid touching the camera lens.
Components and Accessories 1. High Resolution Day&Night IR Camera SIR-4150 2. CAMERA HOOD 3. HOOD ADAPTOR(2EA) 4. USER’S MANUAL 5. DC 12V/4A ADAPTOR 6. POWER CABLE COLOR IR CAMERA User’s Manual Overview FRONT Hood Hood adaptor Fixing the hood onto the camera...
Overview BOTTOM Mounting bracket screw hole Please use the screw hole when fixing the 1/4"-20 UNC (20 THREAD) camera onto the mounting bracket. L:4.5mm±0.2mm (ISO standard), Please use the clamp screw as specified below. or 0.197" (ASA standard) *The mounting bracket can be separated and attached to the top of the camera.
Adjust to Lens Adjust to the lens's zoom and focus. 1. Please loosen a front cover fixing screw with picture and separate cover 2. Please unlock the Zoom or Focus lever to release it. 3. Adjust the zoom or focus lever by moving it to WIDE(NEAR)or TELE(FAR) position.
Connecting to Power The recommended adaptor specification for SIR-4150N/P is DC 12V/4A. Please check the standard power requirement before connecting to power. When the resistance value of copper wire is at [20°C(68°F)] Copper wire size(AWG) #24(0.22mm #22(0.33mm #20(0.52mm Resistance value(Ω/m) 0.078 0.050 0.030...
Operating Your Camera Menu SETUP menu LENS • SHUTTER • - - - - • (condition and speed control) WHITE BALANCE control • • BACKLIGHT • • (Backlight compensation) • HIGH AGC (Auto Gain control) NORMAL • • SSNR • •...
Operating Your Camera 1. Please press the SETUP button. • Settings can now be made. The SETUP menu is displayed on the monitor. SETUP 1.LENS 2.SHUTTER - - - 3.WHITE BAL. 4.BACKLIGHT 5.AGC NORMAL 6.SSNR 7.SENS-UP 8.SPECIAL 9.EXIT 2. Please select any function you wish to activate by using the UP and DOWN buttons.
Operating Your Camera SHUTTER (condition and speed control) Because SIR-4150 uses built-in dc lens, shutter speed is fixed at 1/60 basically. SETUP 1. LENS 2. SHUTTER - - - 3.WHITE BAL. 4.BACKLIGHT 5.AGC NORMAL 6.SSNR - - - - : Shutter speed is fixed at 1/60(1/50) FLK : Please select 'FLK' mode when flickering occurs on the screen, due to an imbalance between illumination and frequency.
Operating Your Camera BACKLIGHT (Backlight Compensation) When there is a strong backlight behind the object, clear images of the background as well as the object can still be obtained by using the BACKLIGHT function. 1. Please position the arrow to point to 'BACKLIGHT' on the SETUP menu by using the UP and DOWN buttons.
Operating Your Camera SSNR (Samsung Super Noise reduction) The background noise in the low light level decreases automatically as the level of gain changes. 1. Please position the arrow to point to 'SSNR' on the SETUP menu by using the UP and DOWN buttons.
Page 15
Operating Your Camera SPECIAL 1. Please position the arrow to point to 'SPECIAL' on the SETUP menu by using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the UP or DOWN button. SPECIAL 10.
Page 16
Operating Your Camera 5) When a name has been chosen, please select a position for the name display. Please move the cursor onto 'POS' and then press the SETUP button. The name will appear at the top left hand corner. FRONT DOOR to Locate, then SET to Locate, then SET...
Page 17
Operating Your Camera • Please adjust the size of the area to be observed by using the UP, DOWN, LEFT or RIGHT button. • Please press the SETUP button to save the changes and complete the setting. Note • There is no ‘MD’ output signal. ‘MD’ is on screen display only words. PRIVACY : Mask privacy area you do not wish to appear on the screen.
Operating Your Camera • SHARPNESS : The outline of the video image becomes cleaner and more distinctive as the level of SHARPNESS increases. If the level goes up excessively, however, it may affect the video image and generate noise. IRMODE : If IR LED turned on at night, this function prevents phenomenon that screen center is saturated according to size of window that set.
Specifications SIR-4150N POWER DC12V±10%, 460mA/ 5 .5W(LED ON) Sensor 1/3 inch, Sony Super HAD CCD Total Pixels 811(H) x 508(V) Effective Pixels 768(H) x 494(V) Scanning System 2:1 Interlace Synchronization Internal Fixed Frequancy H:15.734 KHz, V :59.94 Hz Resolution 520 Lines(Color) / 570 Lines(B/W) Video Output CVBS : 1.0Vp-p/75Ω...