Samsung SCO-5083R User Manual

Samsung SCO-5083R User Manual

High resolution weatherproof

Advertisement

High Resolution Weatherproof
IR Camera
User Manual
SCO-5083R

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Summary of Contents for Samsung SCO-5083R

  • Page 1 High Resolution Weatherproof IR Camera User Manual SCO-5083R...
  • Page 2: User Manual

    Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
  • Page 3 Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we'll introduce our model description. ■ SCO-5083R SERIES • NTSC MODEL • PAL MODEL SCO-5083RN SCO-5083RP ■ MODEL DESCRIPTION • SCO-5083RX _ SIGNAL SYSTEM • SIGNAL SYSTEM...
  • Page 4: Safety Information

    safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
  • Page 5 9. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifications or attempted repair.) When cleaning, do not spray water directly onto parts of the product.
  • Page 6: Fcc Statement

    safety information FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation.
  • Page 7: Important Safety Instructions

    Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents...
  • Page 8: Table Of Contents

    contents inTroDuCTion Features Components and Accessories Components names and Functions Adjust the lens's zoom and focus ConnECTion Connecting to Monitor Connecting to Power Using Communications CamEra oPEraTion Menu Configuration Menu Setup TroublEshooTing Troubleshooting sPECifiCaTions Specifications Dimension 8_ contents...
  • Page 9 Without an external sensor, you can use this product to detect motion and generate alarms and thus more efficient monitoring can be achieved. y ssnr4 (samsung super noise reduction) function The high-performance W7 effectively removes low-light gain noise and afterimage to provide clear images even in dark environments.
  • Page 10: Components And Accessories

    Communication RS-485 , Coaxial communication methods are supported. - Coaxial Communications : Pelco Coaxitron RS-485: Samsung-T, Samsung-E, Pelco-D, Pelco-P, Panasonic, Bosch,Honeywell, Vicon, AD, GE y osD The camera’s OSD is complimented by 17 languages. - English, Chinese, Korean, Japanese, German, Italian, French, Spanish, Russian,...
  • Page 11: Components Names And Functions

    ComPonEnT namEs anD funCTions front ▲ Camera sunshield ➊ Knob sunshield : Fixing the sunshield onto the camera. focus lever : Set focus of lens by turn the focus lever. ➌ Zoom lever : Set zoom magnification of lens by turn the zoom lever. ➍...
  • Page 12 Introduction back function jack ❽ GREEN(485 –) : Signal port for RS-485- communication. YELLOW(485+) : Signal port for RS-485+ communication. BLUE (ALARM OUT) : Output port that signals when a motion is detected. GRAY(EXT_D/N) : External signal input port for Day/Night mode setup. BLACK(GND) : Earth-grounding port for external signal.
  • Page 13: Adjust The Lens's Zoom And Focus

    aDJusT ThE lEns's Zoom anD foCus 1. Remove the sunshield from the camera. 2. Remove the front cover from the camera by turning it counterclockwise. 3. Unlock the Zoom or Focus lever before adjusting the lens. 4. Adjust the zoom & focus by moving the lever counterclockwise for (NEAR & WIDE) and clockwise for (TELE &...
  • Page 14: Connection

    connection ConnECTing To moniTor Please connect the Video output jack located on the back of the camera to the monitor. Monitor Camera y As the connecting method varies with the instruments, refer to the manual supplied with the instrument. y Only connect the cable when the power is turned off. ConnECTing To PoWEr You can connect power as shown in the following figure.
  • Page 15: Using Communications

    When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) #24 (0.22mm #22 (0.33mm #20 (0.52mm #18 (0.83mm Resistance value(Ω/m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 y As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera.
  • Page 16 RS-485 communications Using RS-485 communication, the camera menu can be accessed using Samsung Techwin’s System Controller or the DVR. • for accessing the camera from a computer Use a RS-485 converter to connect the camera’s control port with the computer’s serial cable.
  • Page 17: Menu Configuration

    camera operation mEnu ConfiguraTion main sETuP BASIC DAY/NIGHT BACKLIGHT ● ● ● PROFILE INDOOR USER ● ● ● SSDR ● ● OUTDOOR INDOOR ● ● ● WHITE BAL ● AWC  SET ● MANUAL ● MERCURY BRIGHTNESS LENS SHUTTER ● ●...
  • Page 18 camera operation MAIN SETUP Select the function ▶ 1. PROFILE BASIC Change the status using the Function using the Function 2. SSDR Setup switch. Setup switch. 3. WHITE BAL 4. EXPOSURE 5. BACKLIGHT 6. SPECIAL 7. EXIT SAVE 1. Press the Function Setup switch. y Main SETUP menu is displayed on the monitor screen.
  • Page 19 If you select the ITS, the shutter will be set to 1/200 sec. Noise can be detected at night. ssDr (samsung super Dynamic range) If an object has a large variance between bright and dark areas, it will keep bright areas bright and make selected dark areas bright, so that the overall brightness can be maintained.
  • Page 20 camera operation White bal (White balance) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is MAIN SETUP displayed, select ‘White Bal’ by 1. PROFILE BASIC using the Function Setup switch so 2. SSDR that the arrow indicates ‘White Bal’...
  • Page 21 EXPosurE 1. When the SETUP menu screen is displayed, select ‘EXPOSURE’ by using the Function Setup switch so that the arrow indicates ‘EXPOSURE’. 2. Select a desired mode using the Function Setup switch. EXPOSURE SETUP ▶ BRIGHTNESS ---- ----  y brighTnEss : Adjusts the video LENS brightness.
  • Page 22 camera operation baCKlighT The camera uses our own W7 chips that are designed to clearly display the object and the background despite severe reverse light. 1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function Setup switch. so that the arrow indicates ‘BACKLIGHT’. 2.
  • Page 23 y WDr : When there are both bright and dark areas at the same time, this mode makes both areas distinctive. - LEVEL : Select one from low, WDR SETUP middle, high to adjust the LEVEL MIDDLE ▶ 1. brightness of the WDR RETURN setup.
  • Page 24 camera operation sPECial 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’. 2. Select a desired mode using the SPECIAL SETUP Function Setup switch. DISPLAY ▶ 1. y DisPlaY COMM ADJ IMAGE ADJ...
  • Page 25 PROTOCOL. 6. COAX (SAMSUNG- 7. RETURN T,Samsung-E, Pelco-D, Pelco-P, Panasonic, Bosch, Honeywell, Vicon, AD, GE) - CAM ID : Determines the camera's identification number (between 0 and 255). - BAUD RATE : You can select 2400/4800/9600/19200/38400/57600 bps. - UART MODE : You can select NONE, EVEN or ODD for the parity bits.
  • Page 26 camera operation - V-REV : Flip an image vertically. - D-ZOOM : You can use a digital zoom of x1 ~ x16. - SHARPNESS : Select a mode to adjust the thickness of an image’s sharpness. Increase or decrease the level of each mode to adjust the level of sharpness.
  • Page 27 - EXTERN : Ground to the grounding terminal to allow automatic switching between COLOR and B/W (Black/White). - COLOR : The picture is always displayed in color. - B/W : The picture is always displayed in black and white. y BURST MODE : Activate or deactivate the burst mode to maintain or remove the color signal.
  • Page 28: Video Analytics

    camera operation - MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White, Gray. - TRANSPARENCY : Adds or removes transparency from the masking area. - SEL POS/ X POS/ Y POS : Adjust the size and position of the selected area. - RETURN : Return to the SPECIAL menu.
  • Page 29 - MOTION : This product MOTION DET generates signals DET. SIZE ▶ each time an object DET. AREA movement is detected NON DET. AREA in the four areas of 4. INDICATOR the screen so efficient ALARM OUT monitoring can be RETURN achieved.
  • Page 30 camera operation - INTELLIGENCE : Set the intelligent INTELLIGENCE video detection SENSITIVITY ▶ ---- ----  function. DET. SIZE y SENSITIVITY : Set the sensitivity 3. FENCE of the motion 4. APPEAR detection. When 5. INDICATOR you adjust the ALARM OUT higher level, the RETURN more sensitive.
  • Page 31 2) AREA FENCE AREA FENCE - SEL POS : Selects a SEL POS ▶ POS1 position from X POS ------  POS1 ~ POS4. Y POS ------  - X POS / Y POS : Adjust DIRECTION the size and position of the RETURN selected area fence.
  • Page 32 camera operation Before use, set the max/min movement size within the range. Depending on the shape of an object, there can be errors in size detection. From the top of the screen, a max of sixteen objects can be expressed. If the camera shoots an object a short distance away, the video analysis function can be degraded.
  • Page 33: Troubleshooting

    troubleshooting TroublEshooTing If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problems Troubleshooting Nothing appears on the screen. y Check that the power cord and line connection between the camera and monitor are properly connected.
  • Page 34: Specifications

    specifications sPECifiCaTions sCo-5083rn sCo-5083rP video 1/3” 1.3M CMOS Imaging Device total Pixels 1312(H) x 1069(V) 1305(H) x 1049(V) effective Pixels scanning system Progressive Scan Internal synchronization Frequency H : 15.734KHz / V : 59.94Hz H : 15.625KHz / V : 50Hz Color : 1000 TVL Horizontal resolution B/W : 1000 TVL...
  • Page 35 1 Out Coaxial Control ( SPC-300 Compatible ),RS-485 communication Coax : Pelco-C (Coaxitron) Protocol RS-485: Samsung-T, Samsung-E, Pelco-D, Pelco-P, Panasonic, Bosch, Honeywell, Vicon, AD, GE Ir Distance environmental operating temperature -30°C ~ +55°C (+14°F ~ +131°F) / Less than 90% RH / Humidity ※Start up should be done at above -10°C...
  • Page 36: Dimension

    DimEnsion Unit: mm 36_ specifications...
  • Page 37 MEMO...
  • Page 38 SALES NETWORK SAMSUNG TECHWIN CO., LTD. 6, Pangyo-ro 319beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, SEOUL 463-400 Rep. of KOREA Tel : +82-70-7147-8753, 8764 Fax : +82-31-8018-3740 www.samsungsecurity.com SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 2nd Floor, No.

Table of Contents