Exit; Troubleshooting - Samsung SIR-4150 Series User Manual

Operating Your Camera
• SHARPNESS : The outline of the video image becomes cleaner and more
distinctive as the level of SHARPNESS increases. If the level
goes up excessively, however, it may affect the video image and
generate noise.
IRMODE : If IR LED turned on at night, this function prevents phenomenon that
screen center is saturated according to size of window that set. So the
identification of the subject is possible within short distance 3M
RESET : Returns to the level which was set by the manufacturer for shipment.
RETURN : Returns to the SETUP menu.

EXIT

Saves all the setting menus and then exits.
34
COLOR IR CAMERA User's Manual

Troubleshooting

If there are problems in operation, please refer to the items below. If the
problem persists, please contact the agent you purchased this product from.
Problem
Nothing appears on the screen. • Please check the power connection.
• Please check the video signal line connection.
The video image is not clear. • Please check if the lens is clean.
Please clean the lens with a clean cloth or brush.
• Please adjust the contrast feature of the monitor.
• Please make sure that the screen is not exposed directly to
a bright light. Please move the camera if necessary.
The screen is dark. • Please adjust the contrast feature of the monitor.
• If you have an intermediate device, set the 75Ω/ Hi-z
properly, and check the terminals.
There is a problem with the • Please check if an appropriate power source to the
camera operation. The camera camera complies with the manufacturer's standard
surface is too hot and black requirement, or if the voltage keeps changing.
stripes appear on the screen.
Color are not quite right • Please check the 'WHITE BAL' setting
DAY&NIGHT(AUTO, B/W)
• Please check if the AGC menu is set to the OFF position.
mode doesn't Operate.
SENS-UP function doesn't
• Please check if the AGC menu is set to the OFF position.
operate.
• Isn't DAYNIGHT function setting up the color mode?
IR-LED isn't lighted.
• Please change the AUTO or B/W mode.
• Please confirm whether communication setting method
OSD control doesn't operate.
and RS485 control terminal connection fit.
COLOR IR CAMERA
Solution
35
User's Manual