Table of Contents
Advertisement
Overview
Bottom View
T ripod Mounting Bracket Screw Hole
6 ......
Used to fix the camera on a bracket or tripod.
The screw sizes for this hole are as follows:
1/4"-20 UNC (20 THREAD)
L:4.5mm±0.2mm (ISO standard),
or 0.197" (ASA standard)
You can separate the Tripod Mounting Bracket and install it on the
top or bottom of the camera. Make sure to use the Tripod Mounting
Bracket when fixing the camera to a bracket or tripod. Otherwise
the camera may not be secure, or the internal circuitry of the
camera may be damaged.
Rear View
7
9
❿
7
Function Setup switch
Display the menu on the screen and move the cursor in four directions to confirm
status or after changing a selected item.
10
COLOR CCD CAMERA
6
⓫
8
User Guide
Power Supply/Video Output UTP Port
8
This port accepts power for the camera (AC 24V or AC 28V), outputs video, and
facilitates RS-485 communication. (Refer to P16, UTP Cable)
9
Power LED
This lamp is lit when the camera is receiving power normally.
❿
Power Input Terminal Block
If the UTP cable cannot be used for power supply (distance over 300m, for example),
this cable is used instead for connecting DC 12V / AC 24V power to the camera.
Video output terminal
⓫
Sends video signal and connects to the video input terminal of the monitor.
LENS
The lens is not supplied with this camera. Purchase a lens suitable for your environment.
This camera accepts the auto iris lens and both C-and CS-mount lens.
Notes
• T o use the functions of this camera effectively it is recommended that a DC type Auto Iris
lens is used.
• K eep the lens surface clean, if it becomes contaminated with dirt or fingerprints the
picture quality suffers.
COLOR CCD CAMERA
Overview
Installation
11
User Guide
Advertisement
Table of Contents
