To Install The Replacement Pump & Brush Belts - Bissell POWERWASH 1694 User Manual

To Install The Replacement Pump & Brush Belts
With the unit still on its side, loop one end of the
1.
replacement pump belt around the red pump
pulley and the other end around the silver motor
shaft (see illustration). Do not twist the
replacement pump belt.
Re-install the toothed brush belt first onto the red
2.
pump pulley and then onto the toothed end of the
brush (see illustrations)
Re-install the brush into the base of the unit.
3.
Place the black brush arm onto the brush and
4.
slide black brush arm into original position
(see illustrations).
Re-install the red retainer plate and Phillips head
5.
screw (see illustration).
Using your finger, gently spin the replacement
6.
pump belt on the silver motor shaft (see
illustration). If assembled correctly, the
replacement pump belt should rotate freely
around the silver motor shaft and drive pulley
without obstruction. The brush should also rotate
freely when the silver motor shaft is turned.
Turn the machine right side up. Replace the
7.
Tank-in-Tank and Belt Access Door
(see illustration).
Assembly is now complete.
If you have any questions, or if you have any
trouble installing your replacement pump belt,
please call BISSELL Consumer Services
in the UK at 0208-503-3233 or for all other
countries call BISSELL at 01-616-453-4451.
Or visit the BISSELL website
16
: www.bissell.com
1
2
3
4
Red Retainer
Plate
5
6
7
Belt
Access Door