To Install the Replacement Brush Belt
*QuickSteamer PowerBrush models only
1.
Turn the machine off and unplug from wall outlet.
2.
Remove Clean/Solution and Collection Tanks.
3.
Lie machine down to access the bottom of
the machine.
4.
With a Phillips head screwdriver,
Brush Cover and remove.
5.
Remove the Brush End Cap and remove belt
from brush.
6.
Brush can now be removed.
7.
Belt can be removed by sliding off the Motor Pulley.
8.
Clean or replace belt. Attach belt to Motor pulley
and brush, insert brush into right side End Cap.
9.
Reattach the left End Cap and slide brush back
into place.
10.
Replace the brush cover and screw into place.
3
5a
8
w w w . b i s s e l l . c o m
ug603-5603_1770_206.indd 9
ug603-5603_1770_206.indd 9
unscrew the
4
Brush Cover
6
9
5
7
10
9
8 0 0 . 2 3 7 . 7 6 9 1
2/28/06 4:27:44 PM
2/28/06 4:27:44 PM