Specifications - TechBook in.touch 2 Manual

Specifications

Environmental
Humidity:
Operating temperature:
Storage temperature:
Water ingress protection:
Compatibility
in�yt, in�ye, in�yj, in�xe, or in�xm2 spa systems manufactured in or after 2012�
Regulatory Compliance Information for internal transceiver module
United States
Contains FCC ID: OA3MRF89XAM9A
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules� These limits are designed to provide reasonable protection against harmful interference in a residential
installation� This equipment generates, uses and can radiate radio frequency energy, and if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications� However, there is no
guarantee that interference will not occur in a particular installation� If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna�
• Increase the separation between the equipment and receiver�
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected�
• Consult the dealer or an experienced radio/TV technician for help�
Canada
Contains IC: 7693A-89XAM9A
This device complies with Industry Canada license exempt RSS standard(s)� Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device�
Europe
The internal transceiver module has been certified for use in European countries�
The following tests have been completed, and passed:
Test standard ETSI EN 300 220-2 V2�4�1:
• Frequency error & drift
• Effective radiated power
• Transient power
• Modulation bandwidth
• Unwanted emissions in the spurious domain
• Receiver spurious radiation
Test standard ETSI EN 301 489-3 V1�6�1:
• Conducted emissions
• Radiated emissions
• Radiated immunity
Up to 85% non condensing
-4°F (-20°C) to 140°F (60°C)
-22°F (-30°C) to 185°F (85°C)
IPX5 for CO module
23