Led Status - TechBook in.touch 2 Manual

LED Status

LED
Each in�touch 2 module has a status LED that can be used for troubleshooting purposes�
The LED is located on the top of both enclosures�
EN Module (home)
Pairing mode
Router not detected
Router detected
in�touch 2 server detected
Module is fully functional
* When the LED status is blinking (blue, green or red) this
indicates that the communication between the EN module and
the CO module it not established.
status LED
CO Module (spa)
Yellow (Blinking) Pairing mode
Red Spa controller not detected
Green
in�touch 2 server detected
Module is fully functional
Blue
status LED
Yellow (Blinking)
Red
Blue
9