Stake The Room; Sealing Along The Vehicle Wall - Carefree of Colorado VACATION'R Owner's Manual

Carefree of Colorado
S R
TAKE THE
1. At the bottom, fold the room panels inside or outside.
2. Starting at the back of the room, place a stake through the tie down loop and
drive the stake into the ground.
NOTE: There
methods for the stake to grab
the loop. For short stays, use
the hook of the stake to hold
the loops or for longer stays or
if expecting winds, place the
stake through the loop.
3. Pull the panels straight and
stake the front corners.
4. Stake the center tie down loops.
S A
EALING LONG THE
1. On the inside of the room fold the side wall along the vehicle wall.
2. Lift the seal assembly up and press into the corner of the folded fabric. The
1
velcro of the seal will attach to the velcro on the room side wall.
Tip: Fold the seal into thirds with the velcro out. Place the top third on the room
wall then fold down the 2
last third.
3. At the top, pull the strap through the slot in the fabric and hook the strap into the rail
clamp.
4. Drive a stake slightly under the vehicle then pull the bottom strap through the slot in
the fabric and hook the strap to the stake. or Hook the strap to the vehicle frame.
Tighten the strap as required.
5. To tighten or loosen the strap hook refer to "The Strap Hook" on page 9.
1
VELCRO® is the registered trade name of Velcro Industries. The term "velcro" is used to
generically describe the fabric hook and loop fasteners used with the product.
8
OOM
are two
V
EHICLE
nd
third and place against the wall. Unfold and place the
W
ALL