Omron H7CZ-L8 Manual page 6

H7CZ
Nomenclature
Display Section
1. Key Protect Indicator
2. Control Output Indicator
3. Reset Indicator
4. Present Value (Main Display)
(Character height: 10 mm)
5. Set value (Sub-display)
(Character height: 6 mm)
Character Size
Character Size
for Main Display
for Sub-display
6 mm
10 mm
Dimensions
Counters
H7CZ-L8/-L8D1 (Flush Mounting/Surface Mounting Models)
Dimensions with Flush Mounting Adapter
H7CZ-L8/-L8D1 (Adapter and Waterproof Packing Ordered Separately)
58
Dimensions with Front Connecting Socket
H7CZ
*
-L8@
92.3
P2CF-08(-E) (order separately)
Front Connecting Socket
* These dimensions depend on the kind of DIN Track. (Reference value)
6
1
2
3
6
7
9
48 × 48
Y92S-29 (order separately) Panel
Waterproof Packing
(51)
48
7.5
90
4
5
8
6th digit 1st digit
14.2
6 63.7
44.8×44.8
Y92F-30 (order separately)
P3G-08 (order
Flush Mounting Adapter
separately)
Back-connecting
Socket
84.8
Operation Keys
6. Mode Key
(Changes modes and setting items.)
7. Reset Key
8. Up Keys 1 to 6
Switches
9. Key-protect Switch
(Default setting) OFF ON
(Enable)
(Disable)
(Unit: mm)
Panel Cutouts
Panel cutouts are as shown below. (according
to DIN43700).
60 min.
+ 0.6
45
0
+ 0.6
45
0
15 min.
60 min.
Note: 1. The mounting panel thickness
should be 1 to 5 mm.
2. To allow easier operation, it is
recommended that Adapters be
mounted so that the gap between
sides with hooks is at least 15 mm
(i.e., with the panel cutouts
separated by at least 60 mm).
3. It is possible to horizontally mount
Timers side by side. Attach the
Flush Mounting Adapters so that
the surfaces without hooks are on
the sides of the Timers. If they are
mounted side-by-side, water-
resistance will be lost.
n Units mounted
side by side
A
+1
A=(48n−2.5)
−0
With Y92A-48F1 attached.
A={48n−2.5+(n−1)×4}
With Y92A-48 attached.
+1
A=(51n−5.5)
−0
+1
−0