GE Amersham Typhoon Operating Instructions Manual page 60

4 Amersham Typhoon Control Software
4.1 Main window
Part
6
7
8
9
Scanning mode tabs
The scanning mode can be chosen by clicking on one of the scanning mode tabs.
Scanning mode
Fluorescence
Phosphor Imaging
Densitometry
Depending on the chosen scanning mode, different options will be available in the Scan
settings pane. For examples of the different scanning mode windows, refer to
Scanning modes, on page
Scan settings
Depending on the scanning mode, different scan settings can be chosen. All scan settings
are saved in a Method. There are several pre-programmed methods to choose from
when starting an experiment. If a method is edited by changing any parameter setting,
the user can save the new method with a new method name.
For more information about scan settings in the different scanning modes, refer to
tion 4.2 Scanning modes, on page
60
Function
Instrument status
View image
General settings
Function
Opens the fluorescence imaging window
Opens the phosphor imaging window
Opens the densitometry scanning window
66.
Reference/Description
See Instrument status, on page 64
See View Image, on page 65
See Section 4.3 General settings, on
page 69
Help button
About the Amersham Typhoon Control
Software
66.
Amersham Typhoon Operating Instructions 29193226 AC
Section 4.2
Sec-