GE Amersham Typhoon Operating Instructions Manual page 14

1 Introduction
1.3 Regulatory information
1.3.5 Other regulations and standards
Regulations and standards,
products containing lasers
Regulation / Standard
EN/IEC 60825-1
USA 21 CFR, Chapter I,
Subchapter J, Part
1040.10 Laser Products
This instrument is a class 1 Laser Product (IEC60825-1/EN60825-1). This instrument
meets the laser radiation safety requirements specified in the Code of the Federal Reg-
ulations (21 CFR, Chapter 1, Subchapter J).
The following lasers can be installed in the Amersham Typhoon scanner:
Laser and class
LD laser, class 3B
SHG laser, class 3B
LD laser, class 3B
LD laser, class 3B
LD laser, class 3B
Note:
Different lasers are installed depending on the configuration, see
Amersham Typhoon scanner, on page
14
Description
Safety of laser products
Safety of laser products
Wavelength
488 nm
532 nm
635 nm
685 nm
785 nm
The beam divergence of all laser modules is collimated.
CLASS 1
LASER PRODUCT
IEC60825-1:2014
Operating power
25 mW (CW)
10 mW (CW)
84 mW (CW)
50 mW (CW)
100 mW (CW)
132.
Amersham Typhoon Operating Instructions 29193226 AC
CLASS 1
LASER PRODUCT
EN60825-1 : 2014
Maximum power
70 mW
80 mW
220 mW
290 mW
230 mW
Main components in