GE Amersham Typhoon Operating Instructions Manual page 106

6 Operation
6.2 Preparing the sample
6.2.1 Preparing a sample for fluorescence imaging
Step
2
3
4
5
6
7
8
Prepare a glass slide for
fluorescence imaging
Follow the steps below to prepare glass slides for fluorescence imaging.
Step
1
106
Action
Place the titer plate holder on the multi stage.
Close the spring locks that hold the titer plate holder in place.
Place the titer plate on the desired position in the titer plate holder.
Open the main scanner door of the Amersham Typhoon scanner.
Place the stage on the stage holder, with the printed side of the stage facing
up, and the handle of the stage facing to the front.
Push the stage all the way into the scanner.
Close the main scanner door.
Action
Place the guide plates on the multi stage. Align them with the grooves for
the titer plate holder so that they click into place, see Multi stage, on page
Amersham Typhoon Operating Instructions 29193226 AC
55.