Maintenance; Automatic Key Cutting Machine; After-Sale Description - Xhorse CONDOR XC-MINI PLUS User Manual

Automatic Key Cutting Machine CONDOR XC-MINI PLUS

8 Maintenance

.
Please clean the area around clamps with a brush before the machine starts to work. This is to
assure cutting precision and avoid components damage by metal particles.
To avoid damage or corrosion to the machine, please do not use detergent or other cleaning
products to clean the machine.
Please do not flush or wet the machine with water, in case rust and electrical current leakage.
Under any circumstance, please do not try to clean the working area with air guns and drying
machines, in case any metal carvings getting inside the machine.

9 After-sale description

.
Regarding to customer service and technical support, please contact distributors or
Xhorse online customer service team by scanning the QR code below and downloading
Xhorse official App.
Scan QR Code to download Xhorse APP
All the information and illustrations in this document are for guidance only. Xhorse reserves the right to
alter products designs, dimensions or info to improve the products quality. The contents of this document
are fully protected by Copyright and may not be copied or reproduced in any form (e.g. mechanical,
electronic, printing or video recording), without permission from Xhorse.
38
Automatic Key Cutting Machine CONDOR XC-MINI PLUS
39