Cutting Calibration - Xhorse CONDOR XC-MINI PLUS User Manual

Automatic Key Cutting Machine CONDOR XC-MINI PLUS Automatic Key Cutting Machine CONDOR XC-MINI PLUS
6) Follow the tips on the screen, rotate side B, C, D upward one by one to calibration
4）Please put the HON66 key blank according to the screen, then tighten the clamp, click
until M2 clamp calibration finished.
on'Continue', calibration finished.

6.3 Cutting calibration

5) Enter clamp M2 calibration, rotate side A upward and do not put any keys on the clamp.
1) Enter main interface and click on 'Self Test'.
18 19