Hyundai Elite i20 Owner's Manual page 380

L L ow Beam Assist-Static Light
Low Beam Assist-Static Light
1. Open the hood.
2. Remove the Low Beam Assist-
Static Light bulb cover by turning it
counterclockwise.
3. Disconnect the Low Beam Assist-
Static Light bulb socket-connector.
4. Unsnap the Low Beam Assist-
Static Light bulb retaining wire by
depressing the end and pushing it
upward.
5. Remove the bulb from the Low
Beam Assist-Static Light assem-
bly.
6. Install a new Low Beam Assist-
Static Light bulb and snap the Low
Beam Assist-Static Light bulb
retaining wire into position by
aligning the wire with the groove
on the bulb.
7. Connect the Low Beam Assist-
Static Light bulb socket connector.
8. Install the Low Beam Assist-Static
Light bulb cover by turning it clock-
wise.
Parking (Position) light
OIB075061
1. Remove the socket from the
assembly by pulling it straight out.
2. Remove the bulb from the socket
by pulling it out.
3. Insert a new bulb by inserting it
into the socket.
4. Install the socket in the assembly
by pushing it in.
Front fog light or Daytime running
light (if equipped)
■ 5 Door
• Type A (with DRL)
■ 5 Door
• Type A (without DRL)
■ Cross
OIB077071
OIB077072
OIB077073