Hyundai Elite i20 Owner's Manual page 376

Consult an authorized HYUNDAI
dealer to replace most vehicle light
bulbs. It is difficult to replace vehicle
light bulbs because other parts of the
vehicle must be removed before you
can get to the bulb. This is especially
true for removing the headlight
assembly to get to the bulb(s).
Removing/installing the headlight
assembly can result in damage to
the vehicle.
Information
i
After heavy driving, rain or washing
headlight and taillight lenses could
appear frosty. This condition is caused
by the temperature
between the lamp inside and outside.
This is similar to the condensation on
your windows inside your vehicle dur-
ing the rain and doesn't indicate a
problem with your vehicle.
water leaks into the lamp bulb circuit-
ry, we recommend that the system be
checked by an authorized HYUNDAI
dealer.
Prior to replacing a light, depress
the foot brake, move the shift lever
into the P (Park, for Continuously
difference
Variable Transaxle vehicle) or
neutral (for Manual Transaxle
vehicle), apply the parking brake,
place the ignition switch in the
LOCK/OFF position, and take the
If the
key with you when leaving the
vehicle to avoid sudden move-
ment of the vehicle and to prevent
possible electric shock.
Be aware the bulbs may be hot
and may burn your fingers.
Be sure to replace the burned-out
bulb with one of the same wattage
rating. Otherwise, it may cause dam-
age to the fuse or electric wiring sys-
tem.
WARNING