Programming Hott Transmitter - GRAUPNER 3972 Manual

Programming the switch assignment of HoTT transmitter
3972_MP_V1
To allow the transmitter to transmit the data correctly, you still
have to set one option in your transmitter.
Enter the "Telemetry" menu, open the "Settings & view" line and
move through the touch pads to the "CH OUT TYPE" line. Here
please select the "SAME" mode!
This mode is absolutely necessary for the use of the multiswitch-
module!!
After having installed and connected all the required switches,
now you have to assign the switches and to program correctly
the multichannel functions.
Search in the menu the voice "Multichannel".
Touch shortly the "Set" button to open the selection menu.
Here you have two multichannels available, select one channel.
Move to the desired channel and select it through the "Set" but-
ton. So you can activate (ACT) or deactivate (INH) the channel.
13 / 19