Omron 7 Series Instruction Manual page 34

Display/Problem
appears or the
monitor is turned
off unexpectedly
during a
measurement
No power.
Nothing appears
on the display of
the monitor.
Readings appear
too high or too
low.
Any other
communication
issue occurs.
Any other
problems occur.
Possible Cause
Batteries are depleted.
Batteries are completely
depleted.
Battery polarities are not
properly aligned.
Blood pressure varies constantly. Many factors including
stress, time of day, and/or how you apply the wrist cuff, may
affect your blood pressure. Review sections 2.3 - 2.5 and
chapter 3.
Follow the instructions shown in the smart device, or visit the
"Help" section in the "OMRON connect US/CAN" app for further
help.
If the problem still persists, contact customer service. Refer to
chapter 11.
Press the [START/STOP] button to turn the monitor off, then
press it again to take a measurement. If the problem continues,
remove all batteries and wait for 30 seconds. Then re-install
batteries.
If the problem still persists, contact customer service. Refer to
chapter 11.
Immediately replace all
batteries with 2 new alkaline
batteries. Refer to section 2.1.
Check the battery installation
for proper placement. Refer to
section 2.1.
34
Solution