3.
Position the wrist cuff leaving a clearance of
0.5 inch (1 to 2 cm) between the cuff and the
bottom of your palm.
4.
Wrap the wrist cuff firmly around your wrist. Do not apply over
clothing.
Check to make sure that there is no gap between your wrist and the cuff.
Note
• Make sure the wrist cuff does not cover the
protruding part of the wrist bone on the outside of
your wrist.
• If the wrist cuff comes out of the metal
ring, slide it back through as shown in
the figure to the right.
1
2
19
0.5 inch
(1 to 2cm)