Switching The Hands-Free Kit On/Off - Silvercrest SFA 4.1 D1 Operating Instructions And Safety Instructions

SilverCrest SFA 4.1 D1
Charge the lithium ion battery fully before its first use. Insert the USB plug of the car charger adapter provided into the
USB charging socket (5) of the hands-free kit. Then insert the car charger adapter into an appropriate in-car socket.
The LED of the car charger adapter lights up green. The multi-function button (8) lights up green while charging. A full
charge cycle takes approximately 3 hours. The multi-function button (8) will go out when charging is complete.
Disconnect the car charger adapter from the in-car socket and the hands-free kit.
WARNING! Charge the battery only when the engine is running to save your vehicle's battery.
The battery can also be charged on a PC or using an external mains adapter. A connecting cable with appropriate
micro-USB plug is required for this.

9.2 Switching the hands-free kit on/off

Press the multi-function button (8) for approx. 3 seconds until you hear a series of beeps and buttons 1, 2, 7 and 8
flash briefly several times. The hands-free kit is now ready for use. If a connected device is in range, buttons 1, 2, 7
and 8 will flash blue briefly once approx. every three seconds. If no connected device is in range, buttons 1, 2, 7 and
8 will flash blue briefly twice approx. every three seconds.
If no known device is in range for approx. 10 minutes, a beep will sound and the hands-free kit will switch
automatically from standby mode to energy saving mode. Buttons 1, 2, 7 and 8 do not flash in energy saving mode.
English - 39