Wall Mounting - ZyXEL Communications ES1100-16 User Manual

Make sure you connect the Switch's power cord to a socket-outlet with
an earthing connection or its equivalent.
For ES1100-8P/16/16P/24E, you can place the Switch directly on top of your desk or have it rack-
mounted. Take note of the following:
• The Switch should have a minimum 25 mm space around it for ventilation.
• The Switch should be placed in a desk that has a level surface and that is able to support the weight
of the Switch.
To start using it, simply connect the power cables and turn on the Switch.

2.3.1 Wall Mounting

Do the following to attach your Switch to a wall. See which models can be wall mounted in
on page 12.
See Table 7 on page 13
Table 7 Distance between the centers of the holes for wall mounting
MODEL
ES1100-8P and ES1100-16P
ES1100-16
ES1100-24E
The following figure shows the screw specifications used for wall mounting.
• D = 7.00 mm
• H = 2.00 mm
• L= 15.50 mm
• d = 3.50 mm
Screw the two screws provided with your Switch into the wall (see the figure in step 2). Do not screw
1
them all the way in to the wall; leave a small gap between the head of the screw and the wall.
The gap must be big enough for the screw heads to slide into the screw slots and the power cord to run
down the back of the Switch.
Chapter 2 Hardware Description and Connection
for the distance between screws.
DISTANCE
198 mm
150 mm
210 mm
ES1100 Series User's Guide
13
Section 2.3