8 Operation
After power on, the unit is in the Run mode (= normal operating mode).
Response of the analogue output in case of a fault:
Value below the set measuring
range
Value above the set measuring
range
Value below or above the
detection zone of the sensor
9 Technical data and scale drawing
Technical data and scale drawing at www�ifm�com�
10 Factory setting
TP3231
OU2
I
ASP
-50
AEP
150
COF
0.0
FOU2
OFF
- The output signal falls to min. 3.8 mA (at [OU2] = [I]),
- rises to max. 20.5 mA (at [OU2] = [Ineg]).
- The output signal rises to max. 20.5 mA (at [OU2] = [I]),
- falls to min. 3.8 mA (at [OU2] = [Ineg]).
Analogue signal acc� to setting [FOU2]�
Factory setting
TP3232
TP3233
I
I
-50
0
300
300
0.0
0.0
OFF
OFF
More information at www�ifm�com
User setting
TP3237
I
0
100
0.0
OFF
UK
7