Preparing For Use; Inserting / Replacing The Batteries - Silvercrest 43150 Assembly, Operating And Safety Instructions

Receiver (see Fig. B):
Transmitter:
43150_Funktürklingel_content_HU_CZ_SK.indd 15

Preparing for use

Inserting / replacing the batteries

Insert the batteries to provide power to the device before prepar-
ing it for use.
CAUTION! Use the indicated battery types only. Failure to ob-
serve this advice may result in damage to the product.
Remove the battery compartment cover
device.
Remove the used batteries, if present.
Insert 3 batteries (1.5 V
Note: Ensure correct polarity. This is indicated in the battery
compartment .
8
Close the battery compartment
Remove the holder
from the back of the transmitter and remove the rubber cover
(see fig. C1).
Remove the used batteries, if present (see fig. C2).
Insert a battery (3 V
must face upwards.
Install the rubber cover
back on to the back of the device.
, type AA).
.
8
with the help of flat head screw driver
12
, type CR 2032). The side marked "+"
, close the holder
15
from the back of the
6
of the transmitter
12
15
GB 15
26.03.14 15:59