Advertisement
DESCRIPTION
Motor unit
a
Motor unit
b
Power and storage
USING FOR THE FIRST TIME
• Before using your appliance for the first
time, remove the plastic protection from the
chopping blade (e) which is very sharp and
wash all the accessory parts in warm soapy
water. Rinse and dry.
• Use the motor unit (a) on a work surface that
is flat, clean and dry.
• Do not plug in your Chopping Unit until all of
the accessories have been assembled.
The numbers for each paragraph match the
numbers of the diagrams.
1 - CHOPPING FUNCTION
• Place the chopper bowl (f) on the motor
unit (a).
• Remove the plastic protection around the knife
blades (e), then place them inside the chopper
bowl (f) making sure to secure them safely
(Fig.1.a). Handle the blade extremely
carefully. It is very sharp.
• Then place the food, cut into 2-cm pieces, in
the chopper bowl (f) (Fig. 1.b).
• To avoid any spillages (semi-liquid mixtures,
foods to be reduced to powder, etc), place the
seal cover (d) over the chopper bowl (f) (Fig.
1.c). When making semi-liquid mixtures, fill
your chopper bowl only half full.
• Place the lid (c) on the chopper bowl (f) and
turn it slightly to the left to lock it (Fig. 1.d).
• Now you can plug in your Chopper Unit to the
mains.
Chopping unit
c
Lid
d
Seal cover
e
Chopping blade
f
Chopper bowl
• Press on the lid (c) to start the appliance
(Fig. 1.e).
• To stop the appliance, stop pressing the lid (c):
the appliance switches off automatically.
• Never remove the lid (c) until the blade (e) has
completely stopped.
• Unplug the appliance after each use and before
cleaning it.
• Your blade is fitted with a self-locking system.
To remove the blade (e), gently rotate it
holding it at its top, and then pull it upwards,
while maintaining the chopper bowl (f) with
the other hand.
• You can now safely empty your chopper
bowl (f).
Practical advice:
Important:
you will chop your food better if you
operate the appliance in brief pulses.
• Depending on how fine you want it chopped,
vary the amount of time you press.
• For a finer mince or slice, use the spatula to
remove the food sticking to the walls and
distribute it evenly inside the chopper bowl (f).
• The blade (e) can get blunter after prolonged
use. For the best results, don't hesitate to
replace it.
• After use, leave the appliance to cool down for
2 minutes.
• Do not use when empty.
6
Advertisement
