LOGICDATA LOGIC OFFICE HSU Series Manual page 18

8.4 TROUBLESHOOTING
Usually, malfunctions occur when Handsets are pressed while calibrating. If the Handset fails to function,
you will need to restart the system. To do this:
1. Unplug the Handset from the Control Box.
2. Plug the Handset back into the Control Box.
3. After a few seconds the Handset is ready for operation.
A list of common problems and their solutions can be found in the Manual of the installed Control Box.
8.5 DISPOSAL
The HSU Handset is subject to the WEEE Directive 2012/19/EU.
• Dispose of all components separately from household waste. Use designated collection
points or disposal companies authorized for this purpose
HSU - MANUAL // PAGE 18