Programming The Remote Control; Operating Sony Brand Video Equipment; Programming Non-Sony Video Equipment - Sony Bravia KDS-50A3000, KDS-55A3000, KDS-60A3000 Operating Instructions Manual

Programming the Remote
Control
Operating Sony Brand Video
Equipment
The remote control is preset as indicated below so
that you do not need to program the remote
control.
Sony Equipment Programmable Code Number
BD 101 (Sony Blu-ray Disc Player)
DVD 751 (Sony DVD Player)
STB 801 (Sony Satellite Receiver)
Programming Non-Sony Video
Equipment
Follow the steps below to program your TV's
remote control.
1
In the space provided below, write down the
three-digit code of your equipment found on
the Manufacturer's Codes List on page 26.
If more than one code is listed, try entering
the code listed first.
Code No.
2
Press and hold
simultaneously to light the FUNCTION
button.
3
Enter the three-digit code using
the selected button is lit. If the code is not
entered within 10 seconds, you must repeat
step 2.
2
3
2
4
, or and
- while
4
while the FUNCTION button is lit.
Press
The selected FUNCTION button will blink
twice if your equipment is programmed
correctly and five times if it is not.
To Confirm the Programming
If you can turn on and off the equipment by
pressing the green POWER POWER button, then the
programming is complete. If not, try the next code
listed.
~
• In some cases, you may not be able to program your
remote control. If this is the case, use your equipment's
own remote control.
FUNCTION
• Any one of the
programmed to operate other equipment regardless of
the labeling. For example, if programmed with the
correct code, can operate DVD/VCR combo
equipment. This is useful if your equipment does not
match the labeled buttons available. Make note of your
equipment's programmed button.
• You may program one equipment per FUNCTION
button.
buttons can be
(Continued)
25