Using HDMI Control for BRAVIA
This TV is equipped with BRAVIA Theatre Sync.
The HDMI Control function enables BRAVIA
Theatre Sync to allow communication between
Sony TV's and Sony equipment. Only Sony
equipment with HDMI Control capability is
To Connect HDMI Control Equipment
Use an HDMI cable that bears the HDMI logo for
connection. See page 16 or see the HDMI
connection shown in the Quick Setup Guide
provided with the TV documentation.
Setting the HDMI Control
In order for the HDMI Control function to operate,
the TV and other Sony HDMI Control equipment
must be setup. See page 43 on how to turn the
HDMI Control On. For other equipment, refer to
the operating instructions for that equipment.
HDMI Control Available with Your TV
Once the supported equipment is connected, the
following operations are available:
Turn off the equipment automatically when
you turn off the TV.
When the connected equipment is turned on
by One-Touch-Play, the TV will automatically
turn on and select the respective HDMI input.
Automatically turn on equipment listed under
the External Inputs on the XMB
selected, see pages 7 and 30.
When a Sony A/V receiver with BRAVIA Theatre
Sync is connected, the following additional
operations are possible:
Turning on the A/V receiver when the TV is
Automatically switching to the audio output of
the A/V receiver's attached speakers.
Adjusting the volume and muting of the A/V
receiver with the TV's remote control.
• The A/V receiver cannot be selected from the XMB